Service & Support

ATX 3.0 is a desktop Power Supply Design Guide that Intel updated in 2022, in which new versions of design specifications such as CPU 12V current configuration and Peak Load requirements are included.

If the gaming system is not equipped with a standalone graphics card, it will have no impact.
If it is equipped with the new specification PCIe Gen 5, new optional power needs to be purchased that can provide a new version of PCIe 12VHPWR cable and a design that allows instantaneous power to reach up to 200%.

1. FSP had started laying out and did R&D on PCIe Gen 5 powers since 2020-2021, and is now manufacturing PCIe Gen 5 power supply.
2. FSP has launched its PCIe Gen 5 power supply in Q4 of 2022. All products to comply with Intel PSDG ATX 3.0 and 12VO 2.0 specifications. Power supplies grater than 450W meet Peak Load 200% design. Power supplies less than or equal to 450W meet Peak Load 150% design. New version of PCIe 12VHPWR cable plans to be included as a standard accessory with power supplies with 750W (included) or above. For power supplies less than 750W, it will be configured according to customer’s requirements.

1.    Safety regulation certifications
2.    Energy consumption levels
3.    Input and output power labels

The adapter is divided into two types: desktop and wall mount. Wall mount type power supplies have plugs designed that can be plugged into the outlets on the walls, and the desktop type has power cables on both sides, making them more flexible to use. Customers can choose which to purchase according to their needs.

Smaller products such as thermal printers, small ATM machines, card swipe machines or handheld POS machines, or other products that use external power supplies in consideration of their structural designs.

Flex ATX form factor (hereinafter referred to as Flex) is a power size designed for small industrial control computers. 150*81.5*40mm, some users call it small 1U. It is currently widely installed in network switches, firewalls, and related products.

A2: Since the usage environment of industrial computers are different from the environment of general home/office computers, therefore, the power’s: 
1. Working temperature is 0~50 degrees Celsius
2. They operate 24-hours a day without interruption, therefore, the cooling fan needs to operate for long periods of times, so ball-bearing fans must be used

After eliminating the A2 problem, it seems that it can in the short-run. However, the life cycle of the IPC system vendor’s products must be at least 5 to 10 years, and the life cycle of the retail market powers is only two to three years and cannot satisfy the logistical requirements of IPC SE; therefore, it is not suitable.

In non-peak power usage environments, the power selection of Open Frame PSU is determined by the power required by the system, the temperature inside the system, and the wind flow provided by the system. 
Referring to the product specifications of FSP260-P35-A12, when the power is operating under an ambient temperature of -20℃~50℃, the output power is 260W @ 18.4 CFM; and under the condition with no wind flow, it is only 150W @ Convection. If the temperature of the PSU’s working environment exceeds 50℃, you must refer to the derating curve of the power and reduce the output power as the ambient temperature rises in order to ensure the power will not enter over-temperature protection or even get damaged from overheating. If it is a peak power usage environment, please contact our business unit to have further discussions.

When the AC voltage exceeds the 42.4V peak value or the 60V stable DC voltage.

Chargers include the functions of power supplies, but chargers also have constant current and constant voltage controls inside to satisfy the charging features.

It includes transportation and industrial requirements, two-wheel/three-wheel electric vehicles, electric hand tools, weeders, drones, and unmanned handling robots, etc.

FSP new energy storage system products focus on the development of distributed energy storage systems that are applied on the power load end to provide real-time backup functions, and avoid the impact of power outages caused to the grid by accidents.

The application fields include home use, residential and commercial complex, industrial plants or microgrids, etc. 
For the applications mentioned above, FSP provides 10 kW to 100kW level energy storage system solutions, and takes the solar output voltage range and power feed/self-use requirements into consideration to build the electricity consumption and output power required for backup or emergency power supply.

The requirements of AC power are Single Phase, Split Phase and Three Phase.
The voltage of a single set of battery is 48V/100Ah, and can be expanded up to 10 sets. 
Power supply sequence: PV has highest priority, then city mains, and then battery backup.

Our modular UPS supports 30 power modules working in parallel mode, and parallel expansion up to 8 cabinets.

You can setting the UPS to work on self-aging mode. Self-aging function can test UPS under different load situation without real load, saving more than 90% of energy. Simulate different load conditions without connecting to any real load, saving 90% of energy. On site setting supported, easy for factory testing.

Yes, programmable dry contacts are available in all modular UPS. Customers can easily expand or modify the definition of each port. 
a. Abundant options with three inputs and four outputs, all programmable.
b. Easy setting, just pull the drop-down menu and set.
c. Compatible with all the RM and HT33.

CRPS is short for Common Redundant Power Supply; it is a power module specification applied in the server field defined by Intel together with many leading companies in the industry. The specification focuses on the demands for digitalization, high efficiency, high density, compact size and high stability; it is agreed by many system vendors and widely adopted in the industry.